SKU: 93447011732

Tailgate Insert Letters Compatible for 2019-2021 Chevrolet Slverado - 3M Adhesive and 3D Raised Tailgate Letters

$21.59 $23.99
Save 10%
No.2 Bestseller on giacongchara.com >

Pay in installments of $6.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 28 - Aug 2

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Tailgate Insert Letters Compatible for 2019-2021 Chevrolet Slverado - 3M Adhesive and 3D Raised Tailgate LettersColor: Matte Red Why Choice Us? Phenomenal Badges: 3D raised design with very nice beefy letters match with your, tailgate,creating a cool tailgate POP High Quality: Say goodbye to cheap traditional inferior plastic letters. Our tailgate letters built in 3D reaised with adhesive tape, durable finish resists fading from sunlight and other tough weather conditions. create cost effective plating accessories. No Damage Tuck: If ready to remove the badge

Color: Matte Red

Why Choice Us?

Phenomenal Badges: 3D raised design with very nice beefy letters match with your, tailgate,creating a cool tailgate “POP”

High Quality: Say goodbye to cheap traditional inferior plastic letters. Our tailgate letters built in 3D reaised with adhesive tape, durable finish resists fading from sunlight and other tough weather conditions. create cost-effective plating accessories.

No Damage Tuck: If ready to remove the badge letters, by using a heat gun to soften the glue and using something soft like fishing line to separate the glue from tailgate there is no way of damaging paint.Final clean up of residual glue use a soft micro fiber towel and goo gone.

Questions You Maybe Worry Before Buy:

Q: Would they be difficult/funky/complicated to install?

A: Easy to install in 2 minutes:

Step 1: clean the tailgate thoroughly with rubbing alcohol then wiping with a dry towel to remove any dust, grit, grease, grime wax or oils.

Step 2: Simply peel back the white paper carrier protecting the lettering adhesive.The letter will stay in place on the clear carrier.

Step 3: Keep everything is lined up and pull off the clear installation carrier, pressed hard on the decals after install.

Q: Would they stay on or fall off soon?

A: The tailgate insert letters be made of Zinc alloy. Sturdy and hold up strong regardless of the temperature. No worries even going through car wash!


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 93447011732

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Customer
Birmingham, US
★★★★★ 5
Does everything, super portable, robust construction
This is a super useful hub. I also used the Anker 341 7-in-1 hub for years, and it was very reliable for every feature, and the 555 8-in-1 looks to be of the same quality. The ethernet adapter is a great addition, and it works right away at 1G speeds on Linux 6.18 and even Android 16. I upgraded from the 341 to use this to connect to and configure devices from my desktop without having to drop my normal ethernet connection, and it is fantastic for that. It's a real swiss army hub, perfect travel size, and incredibly handy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2026
C
Verified Purchase
Chris
Louisville, US
★★★★★ 5
Great as long as you know its limitations; runs warm; monitor settings may need to be changed
I reluctantly gave up MagSafe and joined the USB-C future when my employer issued me a new 2019 16" MacBook Pro. Searching for a way to connect my various peripherals I settled on this hub as a reasonable way to connect a 4K display, pass power from the laptop charger (albeit not the full 96W; macOS reports 79W after hub losses—good enough most of the time), connect 1GigE, and provide a few spare USB ports and occasionally-used SD card slots. I've learned a few things: A port that looks like USB-C does not pass video unless it is a "Thunderbolt" port (look for the lightning bolt logo, apparently); connecting a USB-C-to-mini-DisplayPort adapter to the USB-C port on this hub did not allow my monitor to work. Lesson learned. The HDMI port did work, and did pass 4K@60Hz, but only after I adjusted my monitor settings. At first I was convinced either my HDMI cable or this hub were defective, because macOS would only allow me to select 4K@30Hz. I have an LG 4K display, and from reading forums, one must enable 60Hz in the on-screen display menu before the monitor will tell the computer it is capable of displaying 60Hz video. For my monitor, that meant changing "Ratio" in "Quick Settings" to "Original" (it defaulted to "Wide", with a separate configuration for each port), as well as turning on "HDMI ULTRA HD Deep Color" from "Picture" -> "Picture Adjust." After I changed those two settings, 60Hz was not available until I unplugged the HDMI cable from the hub and plugged it in again. After that I had buttery smooth 4K video at 60Hz. The hub works as advertised, at least for my configuration. The 1GigE port works well, and is equivalent to a direct USB-C to Ethernet adapter I tried. It does run warm to the touch as other reviewers have reported. That's not problematic, but I'd prefer it pass the missing 17W to the laptop rather than dissipate it as heat. Time will tell how well the hub holds up, but for now I'm happy. In summary: if you have a new Mac this hub will likely work for you, though you may need to adjust your monitor settings.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 1, 2020
A
Verified Purchase
Amazon Customer
Omaha, US
★★★★★ 4
Older flash drives might not work.
Port labels are too faint to read easily and the PD out port isn't labelled (I suppose they thought it was obvious since it has a fixed cable). The USB ports are speedy except it won't recognize any of my several SanDisk Cruzer Glides. Others flash drives work okay. Works great as an iPhone USB C to TV HDMI converter.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2026
M
Verified Purchase
MNKTJ
Massapequa, US
★★★★★ 5
Perfect, affordable solution for a second home-office setup
I work from home and occasionally like to office out of a different area of the house, but I didn't want to tear down my entire main rig just to move to another room. I picked this up as a secondary docking station for a more casual monitor setup, and it works perfectly for my needs. Setup & Performance: I have this hooked up to my work laptop and two monitors via HDMI. One thing to keep in mind: you’ll need to provide your own USB-C cable and power brick to juice it up. Just make sure you’re using a high-quality charging block to ensure the dock gets consistent power for all your peripherals. The Value: Compared to the price of a name-brand Dell docking station, the value here is incredible. While the more expensive docks might offer a few extra bells and whistles, this is exactly what I needed without the hefty price tag. Pros: Simple Setup: Very straightforward to get running. Dual Monitor Support: Handles two HDMI monitors with no issues. Compact: Great for a secondary or portable "mini" workstation. Bottom Line: If you’re looking for an easy, inexpensive way to run dual monitors from your laptop in another part of the house, this is the way to go. Great performance for the price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
C
Verified Purchase
CrankyToday
Pawtucket, US
★★★★★ 5
Works well but pay attention **REVISED**
The device has worked well for me. However potential buyers should note that the 2nd USB C port is reserved for power input from a separately purchased power supply. So the device provides only a single USB C port for attaching devices. I use the device on power from my own computer. So undocking my computer requires some careful steps in the correct sequence: (1) eject all external drives; (2) power down the external display; (3) unplug Anker from computer; (4) remove power from the computer. The device comes at a great price, though, so excellent value. *REVISION* After four months of use, the HDMI port seemed to fail--the monitor was indicating that it was not connected. I wrote to Anker support and received a reply within two hours. The reply told me how to reset the docking station. It worked. Kudoes to Anker Support!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 15, 2024

recommand products

Sensi Signoria Labrodorite Lux Mable Look Tile 600X1200mm
100.80
Genuine New Nissan Leaf Wheel Centre Cap Black Set Of Four 50mm 2017> 40342BR02A
34.00
The Beatles - A Hard Day's Night - UK Stereo Import - 1964 Parlophone
30.00
The Beatles - The Beatles (White Album) - White Vinyl - 2LP - 1978 Capitol, VG/EX
45.00
Genuine New Nissan Qashqai Radar Sonar Control Module 28538 4ET1D 2018>
173.00