SKU: 51758603289

Can-Am Maverick R Demon Heavy Duty Axle by Demon Powersports

$101.25 $112.50
Save 10%
No.2 Bestseller on giacongchara.com >

Pay in installments of $28.12 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 26 - Jul 31

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Can-Am Maverick R Demon Heavy Duty Axle by Demon PowersportsOur Strongest Axles To Date Our X Treme Heavy Duty Axles are Hell Rated upgraded from our Heavy Duty Line to handle the harshest terrains for racing in Desert, Sand, Mud, Rock and Short Courses. Demon X Treme Heavy Duty Axles are our strongest axles to date. Through years of research and development Demon Powersports has developed a RACE READY, ULTIMATE PERFORMANCE axle that doesnt burn a hole in your pocket and adheres to the highest quality

Our Strongest Axles To Date

Our X-Treme Heavy Duty Axles are “Hell Rated” – upgraded from our Heavy Duty Line to handle the harshest terrains for racing in Desert, Sand, Mud, Rock and Short Courses. Demon X-Treme Heavy Duty Axles are our strongest axles to date.

Through years of research and development Demon Powersports has developed a RACE READY, ULTIMATE PERFORMANCE axle that doesn’t burn a hole in your pocket and adheres to the highest quality standards. The success behind our products stems from thorough quality control. Our products go through extensive and extreme testing and R&D before launching. 

Entire Axle Made Up of 4340 Chromoly Steel Material (In-and-Out)

These axles are bigger, beefier, and stronger. Demon X-Treme Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel material for all its components including the shaft, housing, cage, race, and balls.

This gives the axles the edge it needs for superior strength and longevity. We re-engineered our cage design to enhance durability and use Molybdenum grease to lubricate the internal components. The axle's inner components are micro-polished, so the CVs don't heat up like other products.

4340 chromoly steel is more elastic meaning the axle shaft and its components will absorb any stress and keeps it within itself, eliminating any stress from being transferred into the differential and through your drivetrain. This helps preserve other components on the car!

Available for Long Travel Kits

Our X-Treme Heavy Duty are also tailored made to work with all major Long Travel Suspension Kits & Lift Kits. We understand the requirment for the desert and dunes. As provide an out of the box solution since they are already optimized for heat so your CVs can run cooler and last longer. If you don’t believe us talk to any one of our racers in BITD, SCORE, SNORA, DAKHAR etc whom trust and use our products!

Our long travel axles are tailor made to fit the following suspension kits Cognito Motorsports, Extreme Performance, Fireball Racing HCR, NXS Designs, Madigan Motorsports, SF Raceworks, LSK, Lone Star Racing, Fifty6 Industries, FabWerx, Grounder 4, UTV Wolfpack, Reflex, Long Travel Industries and much more!!

If you need a long travel axle click here to get directed to the correct page! (INSERT LINK)

Backed with 2-Years Limited Warranty

Demon Xtreme axles come with an industry first 2yr limited warranty! We know our axles are built and designed for the baddest and toughest machines, that’s why we have paired our axles with the best warranty in the industry! Our #1 priority here at Demon Powersports is your happiness. Which means we stand behind our products. If you have a problem, we will solve it. Just reach out to our Customer Support Team. We’re here for you. Happiness & Performance guaranteed.

Trust In Demon X-Treme Heavy Duty Axles To Keep You Riding!!

If you have an axle that is optimized for heat and strength then you can have no fear running more power or larger tires on your machine meaning you can have the baddest and toughest machine out there without worrying about getting left behind in the sand, rocks, trail or mud!!

 

CB 2/20/25

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 51758603289

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Carnegie, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
A
Verified Purchase
Andy Sims
West Palm Beach, US
★★★★★ 5
better then expected
Color: Black
very easy to put together works perfectly! very stable for the side would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
Y
Verified Purchase
Yuliet carreño cutiño
Bozeman, US
★★★★★ 3
Divisor de habitaciones
Color: Black
La entrega fue perfecta , si debo de decir que en la descripción del producto decía que media 72 ancho x 72 alto pero no fue así su ancho es de 60 .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
N
Verified Purchase
Nana rice
Omaha, US
★★★★★ 5
Good purchase
Color: Black
We used this screen to divide the beds at a hotel. It gave the perfect privacy, was easy to put up and very sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
K
Verified Purchase
Kaylin
Chelsea, US
★★★★★ 1
Would not recommend
Color: Black
Product was terrible, it was not sturdy at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026

recommand products

"Mill Reef Club Navy Poly Tie" (SOLD)
135.00
Goat Fell From The Spring Road Aug. 12th Scottish Landscape
375.00
"The Exile Of Capri" 1965 PEYREFITTE, Roger (SOLD)
125.00
"Russell Plaid Tweed Sport Jacket By Southwick" Sz 40 Reg (New w/Tags) (SOLD)
324.50
Savant: Artificial Dance - VINYL LP
26.98