SKU: 45660924319

2017-2022 for Street Glide CVO/SE FLHXSE M8 Intake Manifold 55MM 27300121

$65.49 $72.77
Save 10%
No.2 Bestseller on giacongchara.com >

Pay in installments of $18.19 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 25 - Jul 30

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2017-2022 for Street Glide CVO/SE FLHXSE M8 Intake Manifold 55MM 2730012155mm Intake Manifold For M8 Touring Models 2017 2025 & Softail 2018 2025 Features: CNC Machined T6 heat treated cast aluminum. Capable of higher flow. Adds 3 to 5 horsepower. Must have for big bore engines. Fits as a direct replacement. Better, stronger and a more heat resistant replacement than the stock plastic (polymer) manifold. Especially above 124" the stock manifold becomes a restrictive part. Comes with a new rubber seal. Easy to install. Can

55mm Intake Manifold For M8 Touring Models 2017-2025 & Softail 2018-2025

Features:
CNC Machined T6 heat treated cast aluminum.
Capable of higher flow.
Adds 3 to 5 horsepower.
Must have for big bore engines.
Fits as a direct replacement.
Better, stronger and a more heat resistant replacement than the stock plastic (polymer) manifold.
Especially above 124" the stock manifold becomes a restrictive part.
Comes with a new rubber seal.
Easy to install.
Can re-use all OEM parts.

Specifications:
Condition: Aftermarket 100% Brand New
Material: Cast Aluminum
Type: Intake manifold
Color: Silver
Part Type: Intake Manifold
Placement on Vehicle: Front, Cylinder

Replacement Part Number:
27300121
27200016A

(Always compare part numbers to your parts schematics and cross reference appropriately.)
(This is NOT a genuine Part, OEM part numbers are included for product type identification and comparison only.)

Fits Models:
Fit for Touring Models 2017-2025 & Softail 2018-2025 (except 2023-later FLHXSE, FLTRXSE, 2024-later FLHX, FLTRX and 2025-later FLHXU and FLTRXRRSE)

Fit for Electra Glide Highway King FLHFB 2023
Fit for Electra Glide Standard FLHT 2019, 2020, 2021, 2022
Fit for Electra Glide Ultra Classic FLHTCU/I 2017, 2018, 2019
Fit for Electra Glide Ultra Limited CVO/SE FLHTKSE 2017, 2018, 2019, 2020, 2021
Fit for Electra Glide Ultra Limited FLHTK 2017-2024
Fit for Electra Glide Ultra Limited Low FLHTKL 2017, 2018, 2019
Fit for Freewheeler FLRT 2017-2025
Fit for Revival FLH 2021
Fit for Road Glide 3 FLTRT 2023, 2024, 2025
Fit for Road Glide CVO/SE FLTRXSE 2018, 2019, 2020, 2021, 2022
Fit for Road Glide FLTRX 2017-2023
Fit for Road Glide Limited CVO FLTRKSE 2022, 2023
Fit for Road Glide Limited FLTRK 2020, 2021, 2022, 2023, 2024
Fit for Road Glide Special FLTRXS 2017-2023
Fit for Road Glide ST FLTRXST 2022, 2023
Fit for Road Glide Ultra FLTRU 2017, 2018, 2019
Fit for Road King FLHR/I 2017-2022
Fit for Road King Special FLHRXS 2017-2025
Fit for Softail Breakout 114 FXBRS 2018, 2019, 2020
Fit for Softail Breakout 117 FXBR 2023, 2024
Fit for Softail Breakout FXBR 2018, 2019
Fit for Softail Deluxe FLDE 2018, 2019, 2020
Fit for Softail Fat Bob 114 FXFBS 2018-2023
Fit for Softail Fat Bob FXFB 2018, 2019
Fit for Softail Fat Boy 114 FLFBS 2018-2024
Fit for Softail Fat Boy FLFB 2018, 2019
Fit for Softail FXDR 114 FXDRS 2019, 2020
Fit for Softail Heritage Classic 114 FLHCS 2018-2024
Fit for Softail Heritage Classic FLHC 2018, 2019, 2020, 2021
Fit for Softail Hydra-Glide Revival 114 FLI 2024
Fit for Softail Low Rider FXLR 2018, 2019, 2020
Fit for Softail Low Rider S FXLRS 2020, 2021, 2022, 2023, 2024
Fit for Softail Low Rider ST FXLRST 2022, 2023, 2024
Fit for Softail Slim FLSL 2018, 2019, 2020, 2021
Fit for Softail Sport Glide FLSB 2018, 2019, 2020, 2021
Fit for Softail Standard FXST 2020, 2021, 2022, 2023, 2024
Fit for Softail Street Bob 114 FXBBS 2021, 2022, 2023, 2024
Fit for Softail Street Bob FXBB 2018, 2019, 2020
Fit for Street Glide CVO/SE FLHXSE 2017-2022
Fit for Street Glide FLHX/I 2017-2023
Fit for Street Glide Special FLHXS 2017-2023
Fit for Street Glide ST FLHXST 2022, 2023
Fit for Tri Glide CVO/SE FLHTCUTGSE 2020, 2021, 2022
Fit for Tri Glide Ultra Classic FLHTCUTG 2017-2025

(Compatibility Chart is for Reference ONLY!!!
Please Compare with Your faulty unit and the image we provided to Decide Fitment.)

Package Includes:
1x 55mm Intake Manifold with O-ring

You will get what you see in the picture!

Note:
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 45660924319

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 21 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Belleville, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
A
Verified Purchase
Andy Sims
New York, US
★★★★★ 5
better then expected
Color: Black
very easy to put together works perfectly! very stable for the side would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
Y
Verified Purchase
Yuliet carreño cutiño
Dallas, US
★★★★★ 3
Divisor de habitaciones
Color: Black
La entrega fue perfecta , si debo de decir que en la descripción del producto decía que media 72 ancho x 72 alto pero no fue así su ancho es de 60 .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
N
Verified Purchase
Nana rice
Carnegie, US
★★★★★ 5
Good purchase
Color: Black
We used this screen to divide the beds at a hotel. It gave the perfect privacy, was easy to put up and very sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
K
Verified Purchase
Kaylin
Phoenix, US
★★★★★ 1
Would not recommend
Color: Black
Product was terrible, it was not sturdy at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026

recommand products

Floral Embroidered Applique Patch: Beaded Zardozi Cutwork (39 cm)
1603.25
Wilkerson MTP-95-548 Type C Coalescing Filter Element 0.01 Micron
66.49
IPG White PE Film Sealing Tape 3.77" x 36 Yds 9 Mil PE89633WS Pack of 12 Rolls
127.04
Parker 0R50B Quick Exhaust Valve 1/2" NPT Pneumatic Shuttle Valve 450 SCFM
94.99
AMC Jeep 987911 Bezel for Lighting Switch OEM NOS 1974 Loose
21.17