Pro Clima Solitex Adhero 3000 - Self Adhesive Vapour Permeable Membrane (1.5m X 30m)

Pro Clima Solitex Adhero 3000 - Self Adhesive Vapour Permeable Membrane (1.5m X 30m)Pro Clima Solitex Adhero is a self adhesive, vapour permeable external breather membrane for use on masonry and timber structures. It can be quickly applied to immediately provide a wind and weathertight seal on buildings. Once applied, a costly construction tent is not required to protect the building from the elements during construction. Protects the structure: diffusion open and maximum protection against driving rain Up to 4 weeks of outdoor

Pro Clima Solitex Adhero is a self-adhesive, vapour-permeable external breather membrane for use on masonry and timber structures. It can be quickly applied to immediately provide a wind and weathertight seal on buildings. Once applied, a costly construction tent is not required to protect the building from the elements during construction.

- Protects the structure: diffusion-open and maximum protection against driving rain
- Up to 4 weeks of outdoor exposure when protecting ceilings/floors during construction
- Easy and reliable installation thanks to its split release film – sticks immediately to subsurfaces that have sufficient stability
- Reliable sticking of membrane overlaps thanks to water-resistant SOLID adhesive
- Permanent protection thanks to the high resistance to ageing and heat of the TEEE membrane
- Flexible planning of construction schedules: outdoor exposure for pitched roofs with a roof pitch of greater than 14° (3:12): 4 months, walls: 5 months
- Keeps building components dry by means of a pore-free moisture-active functional membrane

- Length: 30m
- Width: 1.5m
- Thickness: 0.7mm
- Water vapour resistance factor µ: 570
- sd value: 0.40 m
- g value: 2.0 MN·s/g
- Vapour permeance: 7 US perms
- Thermal conductivity: 0.04 W/(m·K) ; 0.3 BTU·in/(h·ft²·F)

Application:
- Steep roofs and walls:
Allows airtightness to be achieved on wood-based products and mineral subsurfaces – e.g. on the exterior side of unplastered (fair-faced) masonry or concrete components with joints. For roofs, it also fulfils the requirements of the Central Association of the German Roofing Trade (ZVDH) for an underlay and for temporary coverings for the specified time period.

- Temporary protection for ceilings/floors during construction:
Thanks to its full-surface adhesion, this product provides temporary protection for intermediate ceilings and floors on multi-storey CLT (cross-laminated timber) or wooden-frame buildings during the construction period.